An underbody toolbox is a necessary feature that all Penrith truck owners need. It enables you to perform simple mechanical tasks such as repairs conveniently. Poor weather conditions like heavy rains can make the underbody toolboxes for trucks to look really messy. Mud usually stick and hide in corners and unless you use the right cleaning solution, you may not wipe it off. Commercial polishes stocked by Penrith car service stores are usually effective in cleaning the toolboxes but they don’t come cheap. Fortunately, there are alternatives. You can use household solutions and still achieve the results that the commercial agents guarantee.
Here are 5 effective home solutions that you should try out:
1. Liquid Soap
This is the cheapest home cleaning solution that you can find. You’ll need to put it in hot water to remove stubborn mud from your toolbox. You can either use a piece of cloth or a soft brush to scrub off the dirt once you start to clean the toolbox.
2. Olive Oil
This kitchen ingredient has amazing cleansing qualities. You can use it to remove mud from stainless steel underbody toolboxes. You’ll need to moisten a piece of cloth with the oil before you can wipe off dirt from your truck’s toolbox.
3. Vinegar
You can use either cider vinegar or white vinegar. They are both effective in metal toolboxes. To apply, you’ll need to put vinegar in a spray can and spray directly to the toolbox. Then, you can scrub the mud with a soft brush before washing the deposits off with water.
4. Club Soda
What’s important here is the carbonation. It’s powerful in loosening the dirt from the toolbox. You’ll need to apply it the same way you apply olive oil. If you decide to use Coca-Cola, you’ll have to wash off the sugar deposits with water and soap.
5. Phosphoric Acid
This is also what any good Penrith car service will use for aluminum underbody toolboxes. However, you’ll need to wear rubber gloves and protective eyewear before you can apply the acid. You’ll also need to wash off the deposits with water.
Generally, cleaning your truck’s underbody toolbox shouldn’t be an expensive or an involving undertaking. Using the above household remedies, you should be able to do it regularly. You just need to identify a home solution that works with you. More importantly, remember that a steel tool box will continue to oxidize, especially when it comes into contact with weather elements. A good home cleaning remedy should, therefore, slow down the oxidation process by leaving a bit of a protective film. Even though such a cleaning solution may not come cheap, it can benefit you in the long term. If you are not a DIY person, consider hiring a Penrith car service to help you out.
Leave a Reply