If an alloy rim is still robust, it is possible to use two-component filler to fill the blemish. First of all, clean the alloy rims carefully: the quality of the result obtained will depend, for 80% from this phase. The more the substrate is clean, the better the paint will be as shown in Car Dent Repairs Surrey.
To clean alloy rims you can use a solution with a very low concentration of water and ammonia, use a degreasing product or even better if a high pressure steam dispenser. For some extra advice I refer you to the guide how to clean the car rims.
Once you have a brightly clean circle, sand on the surface damaged by the scratch. If the scratches still feel to the touch (and therefore were not so superficial), you can fill that small groove with two-component filler for metals.
The two-component filler for metals must be applied promptly because it will otherwise harden and can no longer be used. Mix the two components in small quantities so you do not have to act too quickly or anxiety to finish. After applying the two-component filler for metals, it is recommended to re-pass the abrasive paper to obtain a smooth and homogeneous surface.
Remove the dust from the rim and start painting. First pass the primer and wait until it dries completely (it usually takes 6 hours, always read on the label). Spray the metal paint taking care to keep a certain distance between the cylinder and the rim to avoid annoying dripping. Wait at least 24 hours for a perfect drying before passing the polish or a second coat.
This procedure, performed by an experienced Car Dent Repairs Surrey expert. Powder coating can only be carried out by real experts: it is not a simple task to be entrusted to the body shop. The powder coating requires a cleaning of the rim by sandblasting and the applied powder is then baked in an oven and converted into paint. Only afterwards can a glossy or opaque finish be applied according to the user’s choices.
If you want to paint black, matt black or shiny, yellow or even green alloy wheels, you can try a do-it-yourself work much simpler than the classic metal paint. On the market there are special spray films born to customize cars. It is a removable spray film suitable for alloy rims, steel rims or plastic rims.
Although spray film manufacturers claim that a 400 ml can is enough to paint two rims, recommend buying 2 for more passes.
Leave a Reply