Category Archives: Construction

Placa de Aluminio 6061

La placa de aluminio 6160 es una de las aleaciones de aluminio más comunes para aplicaciones de uso general. El aluminio 6061 está compuesto por magnesio, aluminio y silicio, elementos que lo dotan de una gran dureza y que permiten que esta placa pueda ser expuesta a tratamientos fríos y calientes. La placa de aluminio 6061 fue desarrollada en 1935 y se le conocía como aleación 61S. Actualmente, posee unas excelentes propiedades mecánicas y se emplea para soldaduras.

Esta aleación se caracteriza por:

  • Tener más de 5 milímetros de espesor.
  • Poseer una alta resistencia.
  • Ser ligera.
  • Contar con una buena resistencia a la corrosión y a la oxidación.
  • Ser fácilmente maquinable.
  • Al ser tratada con calor se puede someter a trabajos de estampado, cortes, taladros y doblados.

Gracias a estas cualidades, la placa de aluminio 6061 puede ser utilizada en diversas aplicaciones. Por lo general, se usa en áreas estructurales y en piezas mecanizadas que no requieran mucha fuerza. Cuando esta aleación es expuesta a un tratamiento con calor adquiere un muy buen terminado y, además, conserva todas sus cualidades sin sufrir ningún daño en este tipo de tratamientos.

Además de las características mencionadas, la placa de aluminio 6061 también posee una excelente procesabilidad, es un gran conector, cuenta con un acabado atractivo y tiene la capacidad de anodizarse. En este tipo de materiales, tener un buen acabado no sólo es sinónimo de estética, sino también de control de gastos: el suave acabado de la aleación 6061 permite reducir, y en muchos casos eliminar,  el costo de operaciones derivado de la limpieza de la superficie.

Usos de la placa de aluminio 6061

Esta aleación cuenta con diferentes cualidades que lo hacen un material atractivo para diferentes industrias. Por ejemplo, las industrias electrónicas la utilizan para crear protecciones y envolturas para diferentes productos, tales como celulares, tablets y televisores.

 

La placa de aluminio 6061 también se utiliza en la construcción de aplicaciones para pistas de aterrizaje, embarcaciones, señales de tránsito, piezas para equipos de transporte y tanques de almacenamiento. Además, también se usan como componentes estructurales y arquitectónicos.

 

A nivel mundial se utiliza en los moldes de inyección y soplado, en la construcción de las alas y el fuselaje de los aviones comerciales y militares, en las refacciones industriales y en pequeñas piezas de automóviles. Por supuesto, esta aleación también es el componente principal de latas de aluminio para el empaquetado de comida y bebidas. También se utiliza para diferentes tipos de hardware, en conectores y accesorios eléctricos. Finalmente, algunas industrias utilizan la aleación 6061 para construir válvulas y armas de baja tensión.

Understanding Engineering Fabrication: Entry Requirements

When most people hear of a fabrication engineer, also known as a manufacturing engineer or an industrial engineer, they just think of metal constructions and repairs. However, there is more to the job than just assembling, installing, and fitting metal parts. For example, there are planning and documentation aspects that are also worth consideration. To help you understand engineering fabrication comprehensively, here are a few basics:

Duties and Responsibilities

As a fabrication engineer, your core jobs are:

• Fabrication planning: You are expected to draw the plan for the repair, maintenance, installation or construction that is to be done.

• Prepare estimates: You are required to make the necessary quotes pertaining to the supplies that are to be bought for the project.

• Analyze fabrication issues: You need to look at what needs to be repaired or fitted and come up with a practical solution.

• Coordinate technicians: As the head of the project, you are expected to coordinate the technical team on the ground to ensure they work according to your initial plan.

• Certifies quality: It’s your job to check if the supplies meet the necessary quality standards and also to check the final project for the same reason.

• Documentation duties: You are required to document your project plan and make a report of it indicating the various phases for the engineering work.

• Administrative tasks: You are mandated to handle duties such as making payments, talking to clients, and keeping the necessary project records.

Skills

There are several basic skills that you have to possess to be a fabrication engineer, including:

• A strong understanding of basic engineering

• Welding and fabrication skills

• Technical abilities to sketch and interpret plans

• Knowledge of safe and better use of engineering equipment

• Personal attributes like good communication, accuracy, decision-making, and patience

Entry Requirements

There are no particular entry requirements for engineering fabrication, especially if you are working independently and have the necessary skills and knowledge. However, some employers insist on these requirements:

• A national engineering certificate (up to level 4) or a bachelor degree in manufacturing engineering or industrial engineering.

• A license: although licensing requirements often vary from one country to another, most of the states will require a degree from ABET-approved institution, 4 years of documented work experience, and completion of 2-part state exams.

By and large, a fabrication engineer handles a lot of jobs in the industrial sector. The opportunities are so many since all industries require at least one fabrication engineer to handle their metalwork projects.

Placa de Aluminio 6061

La placa de aluminio 6061 es la aleación más utilizada de la serie 6000. La chapa de aluminio 6061 está compuesta por diversos ingredientes, siendo el magnesio y el silicio los principales componentes. La presencia de estos dos ingredientes logran que la placa de aluminio 6061 sea tratable tanto en temperaturas frías como calientes.
Al igual que muchas aleaciones, la placa de aluminio 6061 se usa para aplicaciones de uso general, como en las áreas estructurales. Este tipo de aleación es resistente a la corrosión y posee una buena soldabilidad y maleabilidad, por ello, se puede emplear en aplicaciones de piezas mecanizadas que no necesiten altos niveles de fuerza.
La aleación 6061 se caracteriza por poseer la capacidad de ser forjada en frío, es resistente a la oxidación y la corrosión. Además, también es apropiada para el revestimiento y el procesamiento ulterior de las paredes. Posee buena procesabilidad, es un excelente conector y cuenta con un 90% de grado de maquinabilidad. Finalmente, cuenta con propiedades mecánicas, de unión y puede anodizarse para aplicarse a otros revestimientos.
Gracias a su buena resistencia, su bonito acabado y su capacidad de anodización, la placa de aluminio 6061 es el material favorito de las empresas electrónicas, las cuales utilizan esta aleación como envolturas de consumo. Es perfecto para dispositivos electrónicos grandes como televisiones y computadores, pero también es ideal para teléfonos celulares y otros dispositivos pequeños. Al usar la placa de aluminio para sus fundas, los consumidores perciben una gran calidad y valor en su producto.
Otra característica relevante de esta aleación es que su acabado es sumamente suave de manera que permite reducir, o en algunas casos eliminar, los costos de operaciones de limpieza de la superficie.


Usos de la placa de aluminio 6061

Debido a sus características, la aleación 6061 suele usarse en las placas de base, en componentes automotrices y marinos, hardware y accesorios de la marina, conectores, accesorios eléctricos y montajes de lentes de cámaras. Además, también se emplea en el procesamiento de piezas y conectores de aviones, componentes de cámaras y naves, válvulas, hardware electrónico y armas de baja tensión.
Si recuerdas bien, la placa de aluminio 60 soporta tratamientos con temperaturas frías y calientes. Si deseas realizarle un trabajo en frío, es necesario que tomes en cuenta que será mucho más fácil de hacer si la placa está recocida. Una vez que se haya realizado el tratamiento en frío, el producto resultante puede someterse a los siguientes trabajos: estampados, cortes, taladrados, embutidos, doblados y tocados. Cabe destacar que puedes recurrir a un tratamiento frío estándar para realizar este tipo de trabajo.

Notes On The Selection Of Hydraulic Cylinders

Large machines require powerful elements to facilitate their movement. Hydraulic cylinders are some the preferred choices among today’s available technologies. These feature a cylindrical barrel from which the name is derived. There is also a piston, a rod, and hydraulic fluid that is pressurized to provide the needed force. Oil is the most commonly used liquid for this purpose thanks to its many suitable properties. There are several types of hydraulic cylinders Brisbane companies can choose from. The right model will depend on several factors including the specific application, performance goals, durability targets, and customer support services.

Application

These cylinders have proven to be so useful that they have been adopted by numerous industries across different applications. For example, they can be found in construction equipment like excavators to power the arm and the bucket. Hydraulics is ideal in generating energy to dig into the ground. The same principle can be adopted in manufacturing with robots along the assembly line using these motors. Several civil engineering projects also make use of these for their designs. These systems tend to be lighter than alternatives. The risk of shock and fire are also minimal.

Performance

The performance of the hydraulic cylinders will always be one of the biggest considerations when finding a specific model for a task. Manufacturers offer several different configurations so that clients can pick the best match from the specs sheets. They can even create custom products for highly sensitive projects. Check the stroke lengths, the pin sizes, the overall design, the maximum working pressure, and load limits. Look at the bore, rod and port sizes. Study the technical data to see whether the product is up to the challenge.

Durability

These elements can cost a significant sum. Their purchase cannot be taken lightly, especially if multiple pieces are required. Before making an investment, there must be established confidence in the durability of the products. The easiest way to ensure longevity is to stick to reputable brands. These have proven their worth for years or even decades. Read reviews if these are any or talk to others who have used the same items. Previous customers will be able to share first-hand experience which is often invaluable.

Support

Aside from the products themselves, buyers must also consider the support of the manufacturer or the seller in case things go wrong. Will they be able to make repairs within the warranty period at an acceptable speed? How long will they provide this type of support and what are covered for free? Are there instructions about maintenance and operation? Is customer service quick in addressing concerns over purchases, delivery, and other issues?

Custom Door Signs For Offices

A typical office block has hundreds of offices. Obviously, each office must have a different door. Each door must be properly labelled or marked to ensure the office holder, visitors and other users do not go to the wrong office. The best way to label an office is to install a door sign with the name or logo of the office holder, or the purpose of the room. For instance, toilets in the office can have a sign showing gents or ladies to help avoid confusion. Offices with restricted access can also have signs to indicate the same. By doing this, unauthorized persons who gain entry will not use ignorance as an excuse. After all, the door was clearly marked ‘Authorized Persons Only’. When employees are called to the manager’s office, a door sign on the office will help them find the office quickly.

Installing Door Signs

After moving or setting up shop in a given office building, the management of the organization need to assign offices to their staff. If the accommodation arrangements are satisfactory, the next step is to number and put custom door signs for offices on each of those offices. In addition to making it easier for other staff members, visitors, customers and other stakeholders to find an office, custom door signs give the office holder a sense of ownership. After all, most people like seeing their names and official titles at the entrance of their offices. The door signs can be installed by an in-house maintenance team or a third party with a lot of experience in the industry.

Ordering Custom Door Signs

There are many companies that make custom door signs for schools and offices. Since you are looking for the most unique high quality door sign, it is crucial you take your time to identify the right firm to produce your custom office door signs. The number of years a company has been making signs should be considered. Their reputation in the industry, based on reviews and ratings, should also be considered.

Since you do not know whether or not the company can meet your expectations, you should send them a design and ask them to make a sample. If you like what you see, you can place your custom order. The good news is that most firms have templates on the websites, so you can easily choose a template and have the company make the signs. The delivery time and cost quoted by a company should also be taken into consideration. After all, you can’t wait several weeks for your order to be delivered.

How Concrete Scanning Is Used

Concrete scanning services can save both time and money during excavation because the technology makes it possible to assess underground features and items that may be lodged in solid surfaces. Concrete scanning uses a technology that is similar to X-ray, so while it is called concrete scanning, it also has many uses. The technology used for concrete scanning is known as Ground-penetrating radar or GPR.

Ground-penetrating radar or GPR is a device used to locate underground objects. The device works by using wavelengths that are much like radio waves. GPR gives off low intensity radiation that is harmless to humans, meaning that operators of GPR are not at risk for harmful exposure to radiation.

Scanning is accomplished by placing an antenna close to the ground. The antenna emits a radar signal to the ground. Ground-penetrating radar transmits energy through the ground and solid surfaces like concrete, rock, wood, ice, soil and water. When energy is transmitted and “hits” the desired medium, it reflects back, sending a signal to same antenna or to a nearby antenna. As the antennas are moved along the surface of the ground, a graphic display or radar image of the earth is shown on a graphic recorder. The electrical conductivity of the material being assessed affects the quality of the energy reflected back to the receiver. The penetration depth of GPR increases with electrical conductivity.

Ground-penetrating radar is used extensively in construction. It helps workers locate pipes, buried cables, storage tanks and anything else of interest that might be buried underground. This process is generally used for mapping utilities when deep or extensive digging or excavation takes place whether for a home landscaping, highway or other a major construction project. It also is used in forensic investigations by law enforcement agencies.

Another use for concrete scanning is to locate conduits or rebar in concrete slabs. This eliminates the need for unnecessary cutting or digging and reduces the risk of injury from electrocution when electrical infrastructure could be damaged by digging into concrete slabs.

Concrete scanning may be used to assess the strength of underground tunnels, the integrity of bridges and for assessing underground contamination. It can also be used for some interesting tasks such as locating or confirming historic burial sites, cemeteries or archaeological sites. Other applications include assessment of above-ground and underground structures when it may be unsafe to enter.

When hiring a company to provide concrete scanning it is wise to ask questions about the qualifications of the personnel. These questions include how long the company has been business, can the company provide references and what types of training and certification are required for technicians?

Steel Fabrication Perth Services

The process of cutting, bending and assembling metals parts into individual structures and components is known as fabrication. Steel material is the most preferred metal due to its strength, durability and resistant to rust. Steel parts may be joined to create a complete component which may be used in different applications. Steel fabrication Perth specializes in producing quality fabricated steel structures with various in-house services and products to meet client specifications. With the state of art production facilities and equipment, Perth steel fabrication companies have the capacity to fabricate products for residential, commercial and industrial projects.

After cutting the desired structural steel or sheet metal into parts, joining processes begin. Fabrications involves various processes and stages of turning it into quality finished product. Welding, brazing, milling, soldering and riveting processes including other fastening processes are used to join two or more pieces of metal parts. Milling is a process which entails removing excess material using a milling machine. Both human labor and machines are used in fabrications. Automation is widely used especially in automated welding, laser cutting, turning among other processes.

If you are in need of any type steel product, steel fabrications Perth team comes to your home or workplace to obtain a quote and measurements. You may ask for customized designs or pre-order your styles according to your drawings, size and measurements. The structure will then be manufactured at their workshop using locally or internally sourced stainless steel. Depending on the use of the fabricated products, treatment is applied. This may be through sandblasting or galvanizing as well as powder coating for areas that need it. The job is not done until the team delivers and installs the product to your place.

Steel fabrication in Perth offers different types of services ranging from large to small scale steel products. These products may be used in mining, turret punching, sheet metals works including additional services in sheet rolling, welding, light weight steel works and consulting services. These services are paramount in producing tanks, pipes, trusses, staircases, trolleys, ramps, boilers and ovens. They are all produced for small scale, commercial and industrial application. While you may want to improve your home using steel fabrication products, identifying the best company is crucial if you want to achieve quality.

Steel workshops in Perth have the best technicians producing customized and excellent steel products at competitive prices. They work hard to produce quality yet cheap products. Doing online research is important when identifying the best steel fabricators. Be sure to read online reviews, ratings and testimonials as it helps direct you to the best workshops.

Looking For Industrial Vibrators?

According to a school of thought, all actions in this world take place through vibrations only. It is the vibration of molecules that makes things move. But that looks a bit far-fetched to a naïve eye. However, a clear application of vibrations can be seen in the industries where industrial vibrators are used for many purposes.

These vibrators are generally used in advanced industrial works. One of the most common applications of vibrators is in feeders. Vibrating feeders are used in chemical, ceramic and pharmaceutical industries. You can observe them at construction and quarrying sites as well. These industries need a precise mixture of several ingredients. For example, in pharmaceutical industry, it is necessary to keep the ingredients in the required proportion. Vibrating feeders work pretty well in these situations.

Some of the other types of industrial vibrators include air piston vibrators, railcar vibrators, air vibrators, rotary vibrators, and truck and trailer vibrators. They need accessories and peripherals to make them function. Mounting channels, brackets, controllers, valves, lubricators, and starter boxes are some of the important accessories and peripherals. Truck and trailer vibrators make dumping of material fast and easy. Without vibrators, the trailers find it difficult to shake off the stuck material.

Portable vibrators are useful when permanent installations are not feasible. Manufacturing and construction industry use them quite often. Vibrators come in different sizes as well. Manufacturing industries generally employ large vibrators while pharmaceutical industry needs smaller ones.

Some of the common parameters which influence the use of vibrators include their durability, installation, versatility and precision. Vibrators are subject to frequent wear and tear because of the way they are used. However, a durable product would have sufficient cushioning for those parts which come in direct contact with other things. Installation of machines in heavy industries is an expensive and time consuming task. When you put several parts together, and they all work properly, only then a particular objective is achieved. Thus, it is necessary that industrial vibrators used in advanced industries are easy to install. Further, if the same machine can be used for several purposes, it would save cost to the manufacturer. A versatile vibrator would be more appealing to the buyers as well. Finally, nearly all advanced engineering is based on precision. Thus, the quality of output a vibrator delivers is more important than anything else.

By installing the right equipment, you can save yourself time and money. A good industrial vibrators manufacturer would have a proven track record of delivering satisfactory pre-sales and post-sales services. Since industrial vibrators are a piece of advanced engineering, they need to be regularly inspected and maintained by an expert.

What Is Construction Engineering?

There are many fields of engineering open to the curious and capable university student with an eye for big projects. If you have a mathematical mind, can see the bigger picture but are also detail-oriented, focused, and able to work as part of a team, construction engineering is a possible career choice. Your work will never be boring. Even within this engineering off-shoot there are many more sub-headings to think about.

Heavy Projects

Professionals partaking in this area of construction engineering are hired to undertake massive projects and to organize the large teams needed to carry them out. Cities hire them to handle new infrastructure such as major buildings, highways, and bridges. Some of the most recognizable features of major cities around the world have been designed and/or overseen by civil or construction engineers such as the world’s most famous bridges and highway systems.

Light Projects

In this category, one has the chance to focus on more elegant design. For instance, construction engineers are responsible for the creation of public buildings for use by civic employees and schools. They build playgrounds and public gardens that are wheelchair-accessible.

Plumbing

A lot of the most impressive civil engineering work happens where people can’t see it. This is an interesting direction to take, especially in cities still served by antique plumbing or where local government is thinking ahead to green systems. There are miles and miles of sewage and water tubes running under every major city in the world. They have all been placed there by construction engineering teams.

Repairs

dv1961037This is the less glamorous side of engineering: picking up the pieces when another professional’s work has gone wrong. Sometimes that professional was working a century ago so problems arising today are not so surprising given the century of wear a building has endured. One of the most important repair jobs required in public buildings corrects sinking foundations.

Where earth is soft and deep, an entire building could be dropping a few millimeters yearly until doors don’t open anymore and windows start to crack. Civil engineers have to determine the safety of engaging in repair work while people remain in the building. They measure the depth of foundations and the quality of soil and rock beneath foundations. Armed with these measurements, they can determine what sort of foundational repair to undertake, if any. Sometimes a building just has to come down.

Preparing for Weather

Construction engineers weather different kinds of storms. Sometimes they have everything to do with weather but some storms start with environmental groups or a budget. It might be easier to have roads ready with storm drains when statistics show an increase in precipitation and its violence than to deal with angry protesters.

One way for engineering designers to appease them is to incorporate as many green elements as possible into a project. They start with energy efficient renovations: insulation, solar thermal heating, and better water drainage. Next, they incorporate green materials: product made from non-corrosive, recycled items. Everything still meets safety expectations set down by the local or state authority while also making environmental protection groups happy.

Civil Construction Is For The Benefit Of The Community

img1Civil construction involves the building of facilities that are to be used for the common good in a community. This can include public buildings, such as libraries and courthouses, as well as roads, bridges, dams, canals, and underground utilities.

Preparation for such projects is done using the design talents and knowledge of civil engineers. These professionals have been trained in the engineering techniques that can take advantage of and direct the powers of nature to the benefit of man and to solve some the problems of a society.

Because civil projects are intended to improve the public domain, they typically are funded through taxes or the sale of government bonds. In many cases, voters must be asked for permission to borrow or spend the large amounts that such projects can demand.

Also, because these projects are for the common good, the law permits the acquisition of the property for them from private owners through what is known as eminent domain. This allows a government entity to take over the ownership of land with proper compensation to the current owner as determined to be the fair market value if the land was being employed in its highest and best use.